發電機組使用一段時間之后需要對機組機油進行更換。那么，蘭炭煤氣發電機組組多久換一次機油和濾芯呢？

　　After using the generator set for a period of time, the engine oil needs to be replaced. So, how often does the Lantan gas generator set change its oil and filter element?

　　一蘭炭煤氣發電機組機油的功能

　　The function of the engine oil for a Lantan coal gas generator set

　　01密封和防漏機油可以在活塞環和活塞之間形成密封環，以減少氣體泄漏并防止外部污染物進入。

　　01 Sealing and leak proof oil can form a sealing ring between the piston ring and the piston to reduce gas leakage and prevent external pollutants from entering.

　　02防銹，防腐蝕潤滑油會吸入零件表面，以防止水，空氣，酸性物質和有害氣體與零件接觸。

　　02 Anti rust and anti-corrosion lubricating oil will suck into the surface of the parts to prevent water, air, acidic substances, and harmful gases from coming into contact with the parts.

　　03潤滑和減少磨損活塞和氣缸之間以及主軸和軸承襯套之間快速相對滑動。為防止零件過度磨損，兩個滑動表面之間需要油膜。足夠厚度的油膜將相對滑動部分的表面分開，以減少磨損。

　　03 Lubrication and reduction of wear: Rapid relative sliding between the piston and cylinder, as well as between the main shaft and bearing bushings. To prevent excessive wear of the parts, an oil film is required between the two sliding surfaces. A sufficiently thick oil film separates the surfaces of the relative sliding parts to reduce wear.

　　04清潔優質機油可使發動機零件上的碳化物，油泥和磨損的金屬顆粒帶回到油箱，并通過潤滑油流沖洗零件工作表面上產生的污垢。

　　Cleaning high-quality engine oil can bring back carbides, sludge, and worn metal particles from engine parts to the oil tank, and flush the dirt generated on the working surface of the parts through the flow of lubricating oil.

　　二多久換機油、濾芯

　　How long does it take to change the engine oil and filter element

　　01不同的蘭炭煤氣發電機組制造商和不同功率的蘭炭煤氣發電機組使用的油是不同的。通常，新發動機首次工作50個小時，維修或大修后50個小時。

　　The oil used by different manufacturers of blue charcoal gas generators and blue charcoal gas generators of different powers is different. Usually, a new engine works for 50 hours for the first time and 50 hours after maintenance or major repairs.

　　02機油更換周期通常與機油濾清器（濾芯）同時進行。一般機油更換周期為250小時或一個月。使用2類機油，可以在工作400小時后更換機油，但是必須更換機油濾清器（濾芯）。

　　The oil change cycle of 02 is usually carried out simultaneously with the oil filter (element). The general oil change cycle is 250 hours or one month. Using Class 2 engine oil, the oil can be changed after 400 hours of operation, but the oil filter (element) must be replaced.

　　本文由  蘭炭煤氣發電機組  友情奉獻.更多有關的知識請點擊  http://www.qmtg666.com/   真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from the Lantan Gas Generator Unit For more related knowledge, please click http://www.qmtg666.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.